MX-OPT-TW-Demo-1: Useful mount for testing and for finding the optimum mounting position of the single lens cameras Q2x Hemispheric or D2x Dome. The set includes an Allen wrench and a Torx screw with dowel and the corresponding Torx wrench for installing as alternative wall mount for testing. The camera can be placed on a flat surface or can be mounted on a tripod (1/4” tripod thread at the bottom of the mount).

MX-OPT-SEC-SCREWS-SET: Triple set of anti-theft screws for plugs (4 pcs 6x50) and for machine threads (4 pcs M6x15, 4 pcs M6x30) to securely attach the VarioFlex wall mount

Incl. Allen bit for power screwdrivers (1/4“ in drive with hole for security pin)

Weatherproof connection of external sensors and switching of external devices via MOBOTIX cameras

Key Features:

• Connection to camera using USB or MxBus
• 2 self-powered inputs for connecting sensors
• 2 outputs: 1 powered output, 1 isolated relay output (can be switched to second powered output)
• RS232 interface when using MOBOTIX USB cable to connect to camera
• Protection class IP66/IK08, -30 to 60°C / -22 to 140°F
• Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x

MX-OPT-Ring-L10-L12-PW:

Key Features:

• Enables weather resistance when removing the plastic dome of white hemispheric sensor modules (S1x/M1x)
• To avoid burns by the hot lens, the dome must not be removed within the reach of persons
• Color: white

MX-OPT-Ring-L10-L12-BL:

Key Features:

• Enables weather resistance when removing the plastic dome of black hemispheric sensor modules (S1x/M1x)
• To avoid burns by the hot lens, the dome must not be removed within the reach of persons
• Color: black

Weatherproof connection of external devices and power relays

Key Features:

• Connection to the camera via MxBus
• Six self-powered outputs (12 V, each 10 mA)
• Two isolated outputs (can be switched to “self-powered” using a jumper: 12 V, max. 50 mA)
• Protection class IP66/IK07, -30 to 60 °C / -22 to 140°F
• Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x

Weatherproof PoE Injector (IEEE 802.3af) and network connector

Key Features:

• Needs external power supply units and batteries from 12 to 57 V DC
• Protection class IP66/IK08, -30 to 60°C / -22 to 140°F
• Important: only use with original MOBOTIX patch cables
• Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x and D2x

MX-OPT-MH:

Key Features:

• Suitable for: Q2x, D2x, ExtIO
• Mount for fastening the wall mount MX-OPT-WH (to be ordered separately)
• A set consisting of Pole/Corner Mount and Wall Hount is also available (MX-OPT-WHMH-Set)
• Made of 3 mm stainless steel, white
• Incl. mounting parts and 2 stainless steel straps for pole diameters of 60 to 180 mm

Extension module for the indoor cameras x25 (to be mounted on the backside)

Key Features:

• Not compatible with x26 indoor cameras
• For the connection of external sensors (e.g., door or window • contacts) and switching of external devices (e.g., relays with lamps and motors)
• Two input lines (galvanically isolated, 0 to 48 V AC/DC)
• Two output lines: 2x • isolated (contact load max.30 W or 1 A or 48 V AC/DC) or 2x 12 V DC (max. 50 mA • per output line)
• MxBus terminal (1x2)
• Ambient temperature: 0 to 4°C (32 to 104°F)
• Power consumption: 1 W

Key Features:

• Suitable for: T2x
• The Ethernet terminal board is used to connect the door station for the versions without Mx2wire+ technology. It securely connects the camera module with the 8 connected wires of the network patch cable via RJ45 connector. The Ethernet terminal board is screwed on to the housing (on-wall or in-wall) behind the camera module

Key Features:

• Suitable for: T2x, delivers extended connection options for the door station (e.g., doorbell buttons, light, garage door opener, etc.)
• Connect the IO Module to the camera module via MxBus, which connects it to the network. It has eight physical signal inputs that allow it to distinguish in AC operation between a pending full-wave and half-wave. This makes it possible to connect two switches to each signal input terminal so that 16 button inputs are made available. The inputs can be used for, e.g., bell buttons. The outputs can be used for external devices such as a doorbell, or for outdoor lights or garage door openers (via a power relay).

Weatherproof connection of external sensors

Key Features:

• Connection to camera using MxBus
• 6 self-powered inputs for connectiong up to 6 external sensors
• Protection class IP66/IK08, -30 to 60°C / -22 to 140°F
• Box can be mounted safely out of reach in the wall mounts of M1x, M2x, D1x, D2x

MX-OPT-IC-ESPO:

Key Features:

• Suitable for: Q2x, D2x, ExtIO
• Stainless steel ring (polished)
• Consists of in-ceiling mount and mounting parts
• Easy mounting from front
• Provides optimum protextion for the camera
• Inconspicious, as the visible profile is reduced to a minimum
• Installation dimension (diameter): 150 mm

Key Features:

• Suitable for: Q2x, D2x, ExtIO
• Stainless steel ring (matte)
• Consists of in-ceiling mount and mounting parts
• Easy mounting from front
• Provides optimum protextion for the camera
• Inconspicious, as the visible profile is reduced to a minimum
• Installation dimension (diameter): 150 mm

MX-OPT-IC:

Key Features:

• Suitable for: Q2x, D2x, ExtIO
• Consists of in-ceiling mount and mounting parts
• Easy mounting from front
• Provides optimum protextion for the camera
• Inconspicious, as the visible profile is reduced to a minimum
• Installation dimension (diameter): 150 mm

Key Features:

• Suitable for: 3 modules, outdoors
• Integrated electromagnetic theft protection
• Includes special key for module unlocking, housing gasket and installation material
• Dimensions: 131 x 333 x 18 mm (W x H x D)
• Color: White

Key Features:

• Suitable for: 2 modules, outdoors
• Integrated electromagnetic theft protection
• Includes special key for module unlocking, housing gasket and installation material
• Dimensions: 131 x 233 x 18 mm (W x H x D)
• Color: White

Key Features:

• Suitable for: 1 module, outdoors
• Integrated electromagnetic theft protection
• Includes special key for module unlocking, housing gasket and installation material
• Dimensions: 131 x 143 x 18 mm (W x H x D)
• Color: White

MX-OPT-DK-L11: Key Features:

• Suitable for: Hemispheric sensor modules (for S1x/M1x), S26, S1xM, T2x and Q2x with Vanadlism Kit
• Mounted with the blue MOBOTIX lens wrench (supplied with the Mx camera)
• Polycarbonate (1.5 mm)

Interface box to connect one analog camera directly to a S1x Body as alternative image source (instead of one sensor module)

Key Features:

• Up to two MxDigitizer boxes or two analog cameras can be connected to one S1x Body
• Easy integration of analog cameras into the MOBOTIX IP video system incl. the support of MOBOTIX integrated image analysis tools (e.g, MxActivitySensor)
• Box digitizes the analog signal input (NTSC/PAL)
• Output format PAL: 704 x 525 pixels, up to 25 frames per second
• Output format NTSC: 640 x 480 pixels, up to 30 frames per second
• BNC connection of analog camera to MxDigitizer
• Sensor cable connection of MxDigitizer to S1x Body (to be ordered separately, maximum length 3 m/9.8 ft)
• Operating conditions: Indoors, 0 to 40 C (32 to 104 F)
• Color: white