CCS-1D-4IB, 1 Counting Camera, NVR (ND9312), 8-port PoE Switch (AW-FET-100C-120), 4x2MP 30M IR H.265 Outdoor WDR Pro Bullet (IB9360-H), 2TB HDD

CCS-2D, 2 Counting Cameras, NVR (ND9312), 4-port PoE Switch (AW-FET-060C-065)

Vivotek CCS-2D Features

This 2 Door Crowd Counting Solution Kit is designed to help control occupancy and maintain COVID19 social distancing standards. The benefit of having an automated solution allows for employees normally stationed at the front door to exercise crowd control, to be free to perform other tasks, and not be placed in harm’s way by exposure to the mass public, at close proximity, over a long period of time. The Crowd Counting Solution generates a customizable display that shows the occupancy level of the location in real time, and directs human traffic accordingly.

This VIVOTEK Crowd Counting Solution Kit can manage up to 2 doors of ingress/egress with combined traffic counts. This system has rated 98% accuracy. If there is a discrepancy between the Crowd Counting Solution’s count and human observation, the count is manually adjustable with only a few clicks from the home screen.

This kit comes with the following:

• 2 x Vivotek SC8131 Crowd Counting Camera – this camera only counts people going in or out of the doorway above which it is installed. It does not actually do imaging and surveillance of field of view. The system is designed to monitor 2 Doors (CCS-2D). This means the 2 counting cameras installed over 2 separate entry/exit doors will count the cumulative people going in or out between the two of them, to give an accurate count of occupancy. These cameras are tested and receive a 98% accuracy.
• 1 x ND9312 NVR – This NVR has specialty software loaded onto it that will provide the counting solution display. It also is the interface to control and configure the crowd counting solution. When using the crowd counting camera ONLY in this application there is no need to use hard drive media for storage, as you are not capturing any video or information. The ND9312 has an HDMI output so a monitor can be directly connected for ease of installation.
• 1 x AW-FET-060C-065 4 Port PoE Switch – as the ND9312 does not provide PoE a switch is required to provide power to the SC8131s.

Please note: Individual components are linked below for full specs. This system can not be expanded beyond 1 or 2 Crowd Counting Cameras. No additional cameras should be added. The standard ND9312 cannot provide analytics for counting solutions, the units included in these kits have specialty software installed. The SC8131 has also been specially programmed for this kit and is does not include all the features of the standard SC8131. This kit is non-returnable once ordered.

CCS-2D-4FD 2, 2 Counting Cameras, NVR (ND9312), 8-port PoE Switch (AW-FET-100C-120), 4x2MP 30M IR H.265 Outdoor WDR Pro Dome (FD9360-H), 2TB HDD

Vivotek CCS-2D-4FD Features

This 2 Door Crowd Counting Solution Kit is designed to help control occupancy and maintain COVID19 social distancing standards as well as providing surveillance with 4 fixed lens cameras. The benefit of having an automated solution allows for employees normally stationed at the front door to exercise crowd control, to be free to perform other tasks, and not be placed in harm’s way by exposure to the mass public, at close proximity, over a long period of time. The Crowd Counting Solution generates a customizable display that shows the occupancy level of the location in real time, and directs human traffic accordingly.

This VIVOTEK Crowd Counting Solution Kit can manage up to 2 doors of ingress/egress with combined traffic counts. This system has rated 98% accuracy. If there is a discrepancy between the Crowd Counting Solution’s count and human observation, the count is manually adjustable with only a few clicks from the home scree

This kit comes with the following:

• 2 x Vivotek SC8131 Crowd Counting Camera – this camera only counts people going in or out of the doorway above which it is installed. It does not actually do imaging and surveillance of field of view. The system is designed to monitor 2 Doors (CCS-2D). This means the 2 counting cameras installed over 2 separate entry/exit doors will count the cumulative people going in or out between the two of them, to give an accurate count of occupancy. These cameras are tested and receive a 98% accuracy.
• 1 x ND9312 NVR – This NVR has specialty software loaded onto it that will provide the counting solution display. It also is the interface to control and configure the crowd counting solution. When using the crowd counting camera ONLY in this application there is no need to use hard drive media for storage, as you are not capturing any video or information. The ND9312 has an HDMI output so a monitor can be directly connected for ease of installation.
• 1 x AW-FET-100C-120 8 Port PoE Switch – as the ND9312 does not provide PoE a switch is required to provide power to the SC8131 and cameras.
• 4 x FD9360-H – 2MP 3.6mm fixed lens indoor/outdoor dome.
• 2 TB hard disk drive for use in ND9312 NVR for the recording and storage of surveillance camera footage when employing cameras.

Please note: Individual components are linked below for full specs. This system can not be expanded beyond 1 or 2 Crowd Counting Cameras + 4 x IB/FD9360-H cameras. No additional cameras should be added. The standard ND9312 cannot provide analytics for counting solutions, the units included in these kits have specialty software installed. The SC8131 has also been specially programmed for this kit and is does not include all the features of the standard SC8131. This kit is non-returnable once ordered.

CCS-2D-4IB 2, 2 Counting Cameras, NVR (ND9312), 8-port PoE Switch (AW-FET-100C-120), 4x2MP 30M IR H.265 Outdoor WDR Pro Bullet (IB9360-H), 2TB HDD

Vivotek CCS-2D-4IB Features

This 2 Door Crowd Counting Solution Kit is designed to help control occupancy and maintain COVID19 social distancing standards as well as providing surveillance with 4 fixed lens cameras. The benefit of having an automated solution allows for employees normally stationed at the front door to exercise crowd control, to be free to perform other tasks, and not be placed in harm’s way by exposure to the mass public, at close proximity, over a long period of time. The Crowd Counting Solution generates a customizable display that shows the occupancy level of the location in real time, and directs human traffic accordingly.

This VIVOTEK Crowd Counting Solution Kit can manage up to 2 doors of ingress/egress with combined traffic counts. This system has rated 98% accuracy. If there is a discrepancy between the Crowd Counting Solution’s count and human observation, the count is manually adjustable with only a few clicks from the home scree

This kit comes with the following:

• 2 x Vivotek SC8131 Crowd Counting Camera – this camera only counts people going in or out of the doorway above which it is installed. It does not actually do imaging and surveillance of field of view. The system is designed to monitor 2 Doors (CCS-2D). This means the 2 counting cameras installed over 2 separate entry/exit doors will count the cumulative people going in or out between the two of them, to give an accurate count of occupancy. These cameras are tested and receive a 98% accuracy.
• 1 x ND9312 NVR – This NVR has specialty software loaded onto it that will provide the counting solution display. It also is the interface to control and configure the crowd counting solution. When using the crowd counting camera ONLY in this application there is no need to use hard drive media for storage, as you are not capturing any video or information. The ND9312 has an HDMI output so a monitor can be directly connected for ease of installation.
• 1 x AW-FET-100C-120 8 Port PoE Switch – as the ND9312 does not provide PoE a switch is required to provide power to the SC8131 and cameras.
• 4 x IB9360-H – 2MP 3.6mm fixed lens indoor/outdoor bullet.
• 2 TB hard disk drive for use in ND9312 NVR for the recording and storage of surveillance camera footage when employing cameras.

Please note: Individual components are linked below for full specs. This system can not be expanded beyond 1 or 2 Crowd Counting Cameras + 4 x IB/FD9360-H cameras. No additional cameras should be added. The standard ND9312 cannot provide analytics for counting solutions, the units included in these kits have specialty software installed. The SC8131 has also been specially programmed for this kit and is does not include all the features of the standard SC8131. This kit is non-returnable once ordered.

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 180°
• Adjustable Beam Angle up to 250 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM48 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120/180), as well as 180° illumination for panoramic Multiple-sensor solutions (-180), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM48 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM48 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Product Information

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-60H-24: 60W Single Output Switching Power Supply

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 180°
• Adjustable Beam Angle up to 250 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM48 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120/180), as well as 180° illumination for panoramic Multiple-sensor solutions (-180), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM48 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM48 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-60H-24: 60W Single Output Switching Power Supply

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 180°
• Adjustable Beam Angle up to 250 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM48 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120/180), as well as 180° illumination for panoramic Multiple-sensor solutions (-180), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM48 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM48 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-60H-24: 60W Single Output Switching Power Supply

Features

Please Note: The CM4818 series panels are Special Order with a 4 week lead time. They are non-returnable / non-cancellable once ordered.
Beam Angle (Horizontal): 40° ~ 80°
Distance: 60 ~ 90 m (197 ~ 295 ft)
Beam Pattern: Elliptical
LED Array: 24 pcs LED
Wavelength: 850nm
External Input: IR ON/OFF control
External Output: Day/Night switching
Automatic IR On/Off: Controlled by Light Sensor
Light Sensor Sensitivity: 1/5/10/30(default)/50/100% (Max. 1000 Lux) (accessed via CaMate remote/RS-485 control)
Adjustable IR Power: 20% ~ 100 % (accessed via CaMate remote/RS-485 control)
Power Input: 12~24V DC ±10%, 24V AC(50/60Hz) ±10% (14.5VDC current controlled)
Power Consumption: Max. 48 W
Operating Temperature: -40 °C ~ +60 °C (-104 °F ~ +140 °F)
Working Temperature: -50 °C ~ +60 °C (-122 °F ~ +140 °F)
Humidity: 90%
Dimensions: 220 x 160 x 73 mm (8.6 × 6.3 × 2.9 inch)
Weight: 2.1 kg (4.63 lb)
Cable Length: 0.75 m (2.46 ft) UL AWM
Casing: IP68, IK10
Safety Certifications: IEC 62471, EN 50130-4, CE: EN61000-6-3, EN60598-1, EN60598-2-5, FCC ClassB, EN60529
Warranty: 5 years
Included Accessories: U-Type Bracket (134 × 34 × 81.5 mm)

Features

Please Note: The CM4818 series panels are Special Order with a 4 week lead time. They are non-returnable / non-cancellable once ordered.
Beam Angle (Horizontal): 90° ~ 120°
Distance: 45 ~ 55 m (148 ~ 180 ft)
Beam Pattern: Rectangular
LED Array: 24 pcs LED
Wavelength: 850nm
External Input: IR ON/OFF control
External Output: Day/Night switching
Automatic IR On/Off: Controlled by Light Sensor
Light Sensor Sensitivity: 1/5/10/30(default)/50/100% (Max. 1000 Lux) (accessed via CaMate remote/RS-485 control)
Adjustable IR Power: 20% ~ 100 % (accessed via CaMate remote/RS-485 control)
Power Input: 12~24V DC ±10%, 24V AC(50/60Hz) ±10% (14.5VDC current controlled)
Power Consumption: Max. 48 W
Operating Temperature: -40 °C ~ +60 °C (-104 °F ~ +140 °F)
Working Temperature: -50 °C ~ +60 °C (-122 °F ~ +140 °F)
Humidity: 90%
Dimensions: 220 x 160 x 73 mm (8.6 × 6.3 × 2.9 inch)
Weight: 2.1 kg (4.63 lb)
Cable Length: 0.75 m (2.46 ft) UL AWM
Casing: IP68, IK10
Safety Certifications: IEC 62471, EN 50130-4, CE: EN61000-6-3, EN60598-1, EN60598-2-5, FCC ClassB, EN60529
Warranty: 5 years
Included Accessories: U-Type Bracket (134 × 34 × 81.5 mm)

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 120°
• Adjustable Beam Angle up to 350 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM80 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM80 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM80 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-120H-24: 120W Single Output Switching Power Supply

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 120°
• Adjustable Beam Angle up to 350 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM80 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM80 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM80 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-120H-24: 120W Single Output Switching Power Supply

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 120°
• Adjustable Beam Angle up to 350 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM80 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM80 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM80 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-120H-24: 120W Single Output Switching Power Supply

Key Features:

• Continuous Variable Angle Technology (CVA Tech)
• Variable Field of View 10° ~ 120°
• Adjustable Beam Angle up to 350 Meters
• High Uniformity without Hot Spots and Overexposure
• Accurate Image Quality with Special Beam Patterns for Different Solutions: Circular, Elliptical and Rectangular
• Extreme Weather Support
• Weather-proof IP68- and Vandal-proof IK10-rated Housing
• Flexible Installation
• Five-year Warranty

The CM80 series delivers accurate image quality with special beam pattern designs such as circular (-1040), elliptical (-2040/4080) and rectangular (-90120), providing high intensity and uniformity without hot spots or overexposure issues. The radiant power of the LED’s is effectively projected on to the surveillance area. All ranges of variable angles can maintain highly efficient functionality while also conserving energy.

Thanks to CVA Tech, this series can adjust beam angles according to different installation distances, which make it easy to install. Further, an optional remote control provides users quick and easy to set-up the IR LED from the ground site. To meet the demands of different scenarios, the CM80 series is compatible with a variety of accessories, such as brackets, wall mounts and alignment tools. With the added support and flexibility of an abundance of accessories, the CM80 series is an excellent intelligent IR illuminator for optimizing your video performance in dark or low-light surveillance.

Technical Specifications

Accessories:

• AM-219: L-Bracket for Dual CaMate Illuminators
• CMA-B01: L-Bracket for Single CaMate Illuminator
• CMA-B03: U-Type Bracket for Single CaMate Illuminator
• CMA-B04: Wall-Mount Kit for Single/Dual CaMate Illuminator
• CMA-B05: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-B06: Wall-Mount Kit for Dual/Triple CaMate Illuminator
• CMA-A01: Laser Alignment Kit
• CMA-E01
• HLG-120H-24: 120W Single Output Switching Power Supply

CMA-A01, Laser Alignment kit for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-B01, L bracket for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-B03, U type bracket for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-B04, Wall mount kit for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-B05, Wall mount kit for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-B06, Wall mount kit for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*

CMA-E01 , Wall mount kit for CaMate series IR illuminator, *Special Order/Non-Cancelable/Non-Returnable*